CR63/64: How to set up your alarm clock radio for the first time

How to Set Up Your Magnasonic USB Charging Alarm Clock Radio for the First Time
 

This walkthrough includes:
Setting the Time zone
Using the Dimmer Function
When you unbox your new clock radio, you will find the following items:
• Clock Radio
• Power Adapter
• User Manual

Once you unpack your clock radio. Connect the power adapter to the DC power connection on the back of the clock.
To display the time and change settings, the clock radio must be connected to power at all times.
The time will be pre-set, this time is saved due to the included backup battery. If the battery is removed, the time will need to be set manually. 
The first time you connect the clock radio to power, you will be asked to set the time zone. The sticker covering the face of the clock will list these. The default time zone will be the number 2 which is Eastern Time.
SHOW TEXT ON SCREEN(no audio:
0 - Newfoundland time
1 - Atlantic time
2 - Eastern time
3 - Central time
4 - Mountain time
5 - Pacific time
6 - Alaska time
7 - Hawaiian time
Use the left and right arrows located on the top of the clock radio to cycle through the time zones, press the set button to confirm the setting.
To access Time Zone selection after first time set up, hold the Time Zone Button on the back of the clock for two seconds.
DIMMER
Your clock radio includes a screen dimming feature with Auto, High, Medium, Low and Off settings.
These can be changed by pressing the SNOOZE/DIMMER button on the top of your clock.
•    “AUTO” Automatically brightens the display in a well let room and darkens the display when the room is dark – this is controlled by a sensor on the back of the clock, if this sensor is obstructed, it may give the screen a flashing or flickering appears, remove the obstruction to prevent this
•    “HI” Best for a well lit room
•    “Lo” Darkens the display for easier night time viewing
•    “Off” Turns the LCD backlight off for the darkest setting