To install the outriggers with the sound isolation feet on your Signature Standing Floorstanding Speakers, follow these steps:
• Ensure both outriggers are facing inwards on the bottom of the speaker
• Thread the screws through the small thick washers, followed by the large thin washers.
• Then thread the screws and washers through the outriggers, and into the bottom of the speaker.
• Take the grooved floor spike and thread it through the outriggers from the top.
• Then take the grooved floor spike washer and thread it through the floor spikes bolts, from the bottom of the outriggers.
• Thread the floor spikes bottoms into the floor spikes bolts from the bottom of the outriggers.
• Adjust the floor spikes and floor spike washers to help level the speaker.
• Ensure both outriggers are facing inwards on the bottom of the speaker
• Thread the screws through the small thick washers, followed by the large thin washers.
• Then thread the screws and washers through the outriggers, and into the bottom of the speaker.
• Take the grooved floor spike and thread it through the outriggers from the top.
• Then take the grooved floor spike washer and thread it through the floor spikes bolts, from the bottom of the outriggers.
• Thread the floor spikes bottoms into the floor spikes bolts from the bottom of the outriggers.
• Adjust the floor spikes and floor spike washers to help level the speaker.