RR75/EANOS: How to replace the stylus on an Electrohome Record Player
The stylus installed on your turntable at the time of purchase should last for up to 300 hours of playback with 33 RPM albums or 45 RPM ‘singles’. 78 RPM records, which are made from a harder material may reduce the life expectancy of the stylus.
Should the turntable’s sound become distorted or unsatisfactory, we recommend using a soft stylus cleaning brush to ensure the stylus is free of any debris. This may improve sound quality. Should you need to purchase a replacement Stylus, follow these steps to replace the original.
Please follow the directions below to replace the stylus:
Should the turntable’s sound become distorted or unsatisfactory, we recommend using a soft stylus cleaning brush to ensure the stylus is free of any debris. This may improve sound quality. Should you need to purchase a replacement Stylus, follow these steps to replace the original.
Please follow the directions below to replace the stylus:
- Lift the tone arm off the tone arm rest.
- At the front end of the tone arm, place the tip of your fingernail between the grey stylus holder and the black cartridge housing as shown.
- Press down on the grey stylus holder until it separates from the cartridge housing.
- Completely remove the grey stylus holder with the worn stylus and discard it.
- Place the new grey stylus holder under the cartridge housing.
- First, without touching the needle itself, press upward on the back side of the stylus holder, and then press up on the front edge of the stylus holder until it snaps into place on the cartridge housing.